Self Lubricating Metal Polymer Bearing

Self Lubricating Metal Polymer Bearing

500AB aluminum bronze solid lubricant embedded bushing, the substitute of and parallels in performance with oiles 500AB, is made by alloy of CuAL10Ni with HB>150. The bearing with water lubricant is extremely resistant to heat and corrosion. A fragile phenomenon never occurs at low temperature. The water lubricated aluminum bronze bearing can be used at extremely low temperature.

Description

1.Product Introduction:

500AB aluminum bronze solid lubricant embedded bushing, the substitute of and parallels in performance with oiles 500AB, is made by alloy of CuAL10Ni with HB>150. The bearing with water lubricant is extremely resistant to heat and corrosion. A fragile phenomenon never occurs at low temperature. The water lubricated aluminum bronze bearing can be used at extremely low temperature.


2. Product Technical Data:

Hardness (HB)  >150

Tensile strength (N/mm²) >590

Elongation (%) >10

Coefficient of expansion  1.6×10-5/℃

Limited Temp (℃)  300~400

Max load (N/mm²)  50

MAX SPEED (M/min)   15

Max PV (N/mm2*m/s) 1.25

Compression set amount (400 N/mm²)  <0.01

 

3.Product Feature and Application

It is especially applicable to seawater and river environments such as the ships, valves, water turbines, water treatment, and the environmental engineering, etc.


4.Product details

Material Structure and compositions:

image002_副本.jpg

Solid Lubricant


CuAl10Ni



ALLOY

Cu%

Al%

Zn%

Fe%

Ni%

Mn%

CuAl10Ni

80

10

0

5

10.0

0

5.Oil-free lubricating bearing series

1. No oil lubrication or less oil lubrication. It is suitable for places that cannot be refueled or difficult to refuel. It can be used without maintenance or less maintenance.

2. Good wear resistance, small friction coefficient and long service life.

3. There is an appropriate amount of elastoplasticity, which can distribute the stress on the wider contact surface and improve the bearing capacity of the bearing.

4. The static friction coefficient is similar, which can eliminate the creep at low speed, thus ensuring the working precision of the machine.


 Key technical principle
The composite material used in the inlaid self-lubricating bearing is a new type of extreme pressure resistant solid lubricating material consisting of a metal substrate and a solid lubricant paste embedded in the hole or groove of the substrate. The metal substrate takes up most of the load during the rubbing process. After friction, the solid lubricant in the hole or the groove is transferred or reversely transferred to the friction surface, and a solid transfer film which is well lubricated, firmly adhered and uniformly covered is formed on the friction surface, and the friction and wear are greatly reduced. As the friction progresses, the embedded solid lubricant is continuously supplied to the friction surface, ensuring good lubrication of the friction pair during long-term operation.


Bearing Forms Available In Standard Dimensions

            

图片1.png

Cylindrical bushes

Flanged bushes

Sliding plates

Thrust washer

Flanged washers


Deliver Shipping Term

image001(001).jpgimage003(001).jpgimage005(001).jpg
Different product packaging methodsHigh-intensity carton packagingPalletized packaging library
image007.jpgimage009.jpgimage011.jpg
Professional placementAir freightShipping


Certification:

image003.jpg

Hot Tags: self lubricating metal polymer bearing, China, suppliers, manufacturers, factory, wholesale, customized

Related Products

Feedback

Products List