POM thickness 0.30 to 0.50 mm. It provides high wear resistance and low friction. Even if there is only a small amount of lubricant supplied, the bearing surface has a circular indentation pattern and the bearing assembly should be greased.
POM based thrust washers
1. POM thickness 0.30 to 0.50 mm. It provides high wear resistance and low friction. Even if there is only a small amount of lubricant supplied, the bearing surface has a circular indentation pattern and the bearing assembly should be greased.
2. The thickness of sintered bronze powder is 0.20-0.35mm. A special powdered copper composition is heat fused to the steel backing. This contact layer acts as an anchor for the PTFE layer and performs heat accumulation away from the bearing surface.
3. Low carbon steel, the base of the bushing, steel back provides excellent stability, load bearing and heat dissipation characteristics.
COMPOSITION: Steel Back + Porous Bronze Sinter + POM with Lubrication Indents
2. Product details
---POM sliding layer with lubricant indents
|---Porous Bronze Sinter|
Max line speed V(m/s)
PV value limit (N/mm2.m/s)
Coeff. Of linear expansion
POM coated self-lubricating thrust washers for lubrication or oil lubrication applications.
The standard parts contain grease in the sliding layer, and the ordinary sliding layer should be provided upon request.
the best performance at high load and low speed.
suitable for straight, swing and rotary motion.
a wide variety, available for use on the spot.
POM based thrust washers is widely used in Vehicle chassis, forming machine tools, steel metallurgical machinery, mineral mountain machinery, hydraulic industry and rolling steel industry etc.
Deliver Shipping Term
|Different product packaging methods||High-intensity carton packaging||Palletized packaging library|
|Professional placement||Air freight||Shipping|